1. Home
  2. Sectors We Work In
  3. Electronics and Enclosures Sector

Electronics and Enclosures Sector

Prototyping for performance, protection and production

We support engineers and designers developing electronics and control systems, helping to refine housings, internal layouts and interface components for reliable assembly and operation.

Our UK-based prototyping and manufacturing services deliver functional parts that balance technical performance with aesthetics and usability – from rapid prototypes through to small-batch production.

Whether you’re developing control systems, sensors or consumer electronics, we provide the capability and consistency needed to move quickly from concept to production-ready parts.

Key capabilities

  • SLA 3D printing for fine surface detail and transparent components
  • SLS 3D printing for robust, heat- and impact-resistant housings
  • CNC machining for high-accuracy interface and mounting parts
  • Injection moulding for repeatable production-quality enclosures
  • Vacuum casting for short runs of fully finished polyurethane housings

Typical applications

  • PCB and sensor housings
  • Control panels and interface units
  • Communication devices and monitoring systems
  • Instrumentation casings
  • Connectors, clips and mounting components

Designed for protection and performance

Our ISO 9001 and ISO 14001 accredited facility ensures consistency, reliability and quality from first prototype to pilot production.

We extend your capability, giving you access to fast, repeatable and parts that fit perfectly – electrically, mechanically and visually.

Contact our team on 01763 249760 to discuss your next project, or request a quote using the form below.

Contact us

Request a Quote

Injection Moulding

    • 1

      Step 1

    • 2

      Step 2

    • 3

      Step 3

    • 4

      Step 4

    • 5

      Step 5

    • 6

      Step 6

    • 7

      Step 7

    1/7

    Step 1

    Your Details

    Project Information

    Project name or unique reference

    Quantity required - initial run, and ongoing volumes, if relevant

    Intended use

    Deadline or target date

    Part Information

    File upload

    Please add up to three files (e.g. your CAD file, 2D drawing, and any additional information) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

    Part dimensions (if not obvious from file)

    Tolerance requirements (standard or tighter)

    Cavity Finish

    Do you require multi-impression or multi cavity options? (we can advise if unsure)

    Material Requirements

    Preferred Material or Polymer (if known)

    Material properties required (strength, flexibility, transparency, temperature resistance etc)

    Colour requirements (standard, custom, Pantone or RAL match)

    Food or medical grade requirement

    Tooling

    Tool type preference

    Expected tool life

    Do you require tool ownership

    Support and DFM

    Do you need Design for Manufacture (DFM) review?

    Any known undercuts, inserts, overmoulding, or special features?

    Additional Information

    Budget range (optional, but can help speed quoting)

    Any other notes or requirements?

    Which dispatch method do you require?

    How did you hear about us?

    CNC Low Volume Production

      • 1

      • 2

        Step 2

      • 3

        Step 3

      • 4

        Step 4

      1/4

      About you

      PART 1

      Material

      Which billet size best fits your part?

      Tolerance

      Threaded holes?

      Do you require an inspection report?

      How many offs do you require for this part?

      Upload part 1 file

      Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

      Additional information

      Add another CNC part to this quote?

      PART 2

      Material

      Which billet size best fits your part?

      Tolerance

      Threaded holes?

      Do you require an inspection report?

      How many offs do you require for this part?

      Upload part 2 file

      Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

      Additional information

      Add another CNC part to this quote?

      PART 3

      Material

      Which billet size best fits your part?

      Tolerance

      Threaded holes?

      Do you require an inspection report?

      How many offs do you require for this part?

      Upload part 3 file

      Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

      Additional information

      Add another CNC part to this quote?

      PART 4

      Material

      Which billet size best fits your part?

      Tolerance

      Threaded holes?

      Do you require an inspection report?

      How many offs do you require for this part?

      Upload part 4 file

      Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

      Additional information

      Add another CNC part to this quote?

      PART 5

      Material

      Which billet size best fits your part?

      Tolerance

      Threaded holes?

      Do you require an inspection report?

      How many offs do you require for this part?

      Upload part 5 file

      Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

      Additional information

      Add another CNC part to this quote?

      PART 6

      Material

      Which billet size best fits your part?

      Tolerance

      Threaded holes?

      Do you require an inspection report?

      How many offs do you require for this part?

      Upload part 6 file

      Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

      Additional information

      Add another CNC part to this quote?

      PART 7

      Material

      Which billet size best fits your part?

      Tolerance

      Threaded holes?

      Do you require an inspection report?

      How many offs do you require for this part?

      Upload part 7 file

      Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

      Additional information

      Add another CNC part to this quote?

      PART 8

      Material

      Which billet size best fits your part?

      Tolerance

      Threaded holes?

      Do you require an inspection report?

      How many offs do you require for this part?

      Upload part 8 file

      Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

      Additional information

      Add another CNC part to this quote?

      PART 9

      Material

      Which billet size best fits your part?

      Tolerance

      Threaded holes?

      Do you require an inspection report?

      How many offs do you require for this part?

      Upload part 9 file

      Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

      Additional information

      Add another CNC part to this quote?

      PART 10

      Material

      Which billet size best fits your part?

      Tolerance

      Threaded holes?

      Do you require an inspection report?

      How many offs do you require for this part?

      Upload part 10 file

      Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

      Additional information

      Marketing

      How did you hear about us?

      CNC Machining

        • 1

        • 2

          Step 2

        • 3

          Step 3

        • 4

          Step 4

        1/4

        About you

        Which dispatch method do you require?

        PART 1

        Material

        Threaded holes?

        Upload part 1 file

        Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

        Additional information

        Add another CNC part to this quote?

        PART 2

        Material

        Threaded holes?

        Upload part 2 file

        Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

        Additional information

        Add another CNC part to this quote?

        PART 3

        Material

        Threaded holes?

        Upload part 3 file

        Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

        Additional information

        Add another CNC part to this quote?

        PART 4

        Material

        Threaded holes?

        Upload part 4 file

        Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

        Additional information

        Add another CNC part to this quote?

        PART 5

        Material

        Threaded holes?

        Upload part 5 file

        Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

        Additional information

        Add another CNC part to this quote?

        PART 6

        Material

        Threaded holes?

        Upload part 6 file

        Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

        Additional information

        Add another CNC part to this quote?

        PART 7

        Material

        Threaded holes?

        Upload part 7 file

        Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

        Additional information

        Add another CNC part to this quote?

        PART 8

        Material

        Threaded holes?

        Upload part 8 file

        Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

        Additional information

        Add another CNC part to this quote?

        PART 9

        Material

        Threaded holes?

        Upload part 9 file

        Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

        Additional information

        Add another CNC part to this quote?

        PART 10

        Material

        Threaded holes?

        Upload part 10 file

        Please add up to three files (e.g. your 3D model and up to two supporting documents) for this part. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP and IGES files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

        Additional information

        Discount code

        Marketing

        How did you hear about us?

        Please Note: requests for our 3-Day production speed must meet our 3-Day criteria. All final data for our 3-Day production speed is required by 4.30pm.

        3D Printing

          • 1

          • 2

            Step 2

          • 3

            Step 3

          1/3

          About you

          Which process do you require?

          Material

          Which finish level do you require?

          Which production speed do you require? (i.e. how quickly do you want it made) You can select more than one option if you'd like to see the different pricing options.

          Which SLA Accura material do you require?

          Which finish level do you require?

          Which production speed do you require? (i.e. how quickly do you want it made) You can select more than one option if you'd like to see the different pricing options.

          Material

          Which finish level do you require?

          Which production speed do you require? (i.e. how quickly do you want it made) You can select more than one option if you'd like to see the different pricing options.

          Which material do you require?

          Please specify which DLP material you require (please note: we can only offer 7-12 day dispatch for materials we do not stock):

          Which finish level do you require?

          Which production speed do you require? (i.e. how quickly do you want it made) You can select more than one option if you'd like to see the different pricing options.

          Material

          Which finish level do you require?

          Which production speed do you require?

          Material

          Which finish level do you require?

          Which production speed do you require? (i.e. how quickly do you want it made) You can select more than one option if you'd like to see the different pricing options.

          Quantity required

          Additional information

          Which dispatch method do you require?

          Upload your files

          Please add up to 10 files. Please note, for security reasons, we do not accept zip or RAR attachments. We prefer STEP files, but will accept STL files. If you need to send us large files, please email them to us at office@prototypeprojects.com or call us on 01763 249760

          Marketing

          How did you hear about us?

          Other

          To request a quote for any of our other technologies/services, such as Vacuum Casting, Model Making and Laser Cutting, please complete this contact form.


            Our latest news